Installation picture of silo spiral chute

Installation picture of silo spiral chute

Photo 1: Installation of Silo Spiral Chute: Equipment Introduction: A gravity beneficiation machine used for separating light and heavy minerals through the continuous centrifugal force that occurs during the rotary spiral movement of mortar. 2、 Use skills to set up the FRP spiral chute, calibrate the vertical line, use an iron frame or wood to set the proper position, send the mineral sand to the two ore inlets above the spiral by the sand pump, add makeup water, and adjust the density of the mineral mortar. The mineral slurry naturally swirls from high to low, and a continuous centrifugal force occurs in the flow speed of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the mineral sand, By achieving the effects of gravity and centrifugal force through swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Silo spiral chute installation picture 3. The characteristic spiral chute has attracted more attention among various gravity separation machines due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear ore separation, no moving parts, convenient Computerized maintenance management system, large single area processing capacity, etc. The machine has a wide or gentle groove surface, and the area where the mortar flows in laminar flow is large, which is more suitable for processing medium and fine (-4MM) Granularity ores. Spiral concentrators with diameters of 400, 600, 900, and 1200mm have been produced domestically, Ф The production capacity of 1200mm four heads is about 4-6 T/H. Silo spiral chute installation picture IV. The chute can be divided into three categories according to the Granularity of the processed mineral materials: (1) coarse particle spiral chute, the maximum particle size of ore feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 The use scope of glass fiber reinforced plastic chute is suitable for the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic ores. Installation picture of silo spiral chute Installation picture of silo spiral chute

Installation picture of silo spiral chute