Coal washing fiberglass spiral chute

Coal washing fiberglass spiral chute

Coal washing fiberglass spiral chute 1. Introduction: Gravity beneficiation is widely used in metal and non-metallic ore beneficiation due to its small environmental pollution and low cost. The fiberglass chute is one of the gravity separation equipment, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle sizes of -0.2mm. During the sorting step, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the bottom of the chute. 2、 The usage method is to make the fiberglass chute stand up, align it with the vertical line, fix it in the appropriate position with an iron frame or wood, and send the sand ore to the two feeding ports on the top of the spiral through a slurry pump. The water is added and the mineral slurry concentration is adjusted. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the rotating inclined flow rate, which is distinguished by the gravity, particle size, and state of the mineral sand, By utilizing the gravity or centrifugal force of the swirling flow, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. Coal washing fiberglass spiral chute 3. Advantages or characteristics: 1. Extremely high efficiency, high recycling rate, and precise screening of ore; 2. No power required; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; 4. Low cost and long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The fiberglass spiral chute for coal washing is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating discs is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is connected together through screws. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. She has the advantages of being lightweight, sturdy, and durable in using consumables. There is a multi tube feeding homogenizer above the rotating groove to screen minerals evenly, which is not cumbersome to operate. The screening machine does not need to be restricted from being placed on the cross (or tripod) on the support table. The uniform slurry is slowly fed to the surface of the spiral groove through the feeding groove on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve type new equipment selection groove, allowing the sorted new products to be divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that separates and merges the intercepted multi-directional mineral flows. The cross section of the spiral chute and the slope change of the curve are very applicable to the selection of fine materials. 5、 Scope of application: The spiral concentrator is suitable for processing 0.6-0.03 millimeters of vein ore and this ore sand, but it is unfavorable for separation when the mud content is high. At present, it has been widely used for processing iron ore sand, tungsten, tin ore, tantalum niobium, coastal and riverside ore sand, and placer gold. Coal washing fiberglass spiral chute Coal washing fiberglass spiral chute

Coal washing fiberglass spiral chute