Jiangxi Shicheng Spiral Chute Factory Direct Sales

Jiangxi Shicheng Spiral Chute Factory Direct Sales

Jiangxi Shicheng Spiral Chute Factory Direct Sales 1. Introduction: Gravity beneficiation is widely used in metal and non-metallic ore beneficiation due to its small environmental pollution and low cost. The fiberglass chute is one of the gravity separation equipment, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle sizes of -0.2mm. During the sorting step, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the bottom of the chute. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. Jiangxi Shicheng spiral chute manufacturer sells directly. 3. Characteristics or advantages. 1. Major and strong processing capacity. Today's mineral aggregate processing is objectively conditional on large-scale to create revenue. 2. Fine granulation: for the treatment of fine and micro particle minerals, especially the treatment of ore materials with Granularity of -0.047MM, the original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and machine vibration, the spiral concentrator has developed from a simple use of gravity and water resistance to a composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, more useful minerals are enriched and the separation of fine particles from these fine particles increases the ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple and simple, and it is convenient for maintenance management. Jiangxi Shicheng Spiral Chute Factory Direct Sales 4. The structure of the fiberglass spiral chute is composed of six parts: a feeding distributor, a feeding groove, a spiral groove, an equipment selection groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating pieces is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre designed durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and durable consumables. A multi tube ore feeding homogenizer is installed above the rotating groove to screen minerals, which is also easy to operate. The screening machine is freely placed on the cross (or tripod) of the support table. The uniform mineral mortar is slowly fed onto the rotating groove surface through the feeding groove on the spiral groove head for selection. The bottom of the spiral groove is installed in a valve block type new equipment cutting groove, and the sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selected width of each new equipment by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The change in the slope of the cross-section and curve of the fiberglass chute is particularly applicable for the selection of fine-grained mineral materials. 5、 Use This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum, tantalum niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from fine and small materials with Granularity of 0.3-0.02MM. Jiangxi Shicheng Spiral Chute Factory Direct Sales Jiangxi Shicheng Spiral Chute Factory Direct Sales

Jiangxi Shicheng Spiral Chute Factory Direct Sales