Rotating spiral chute equipment

Rotating spiral chute equipment

Rotating spiral chute equipment 1. Introduce the chute beneficiation process, including inclined flow separation. The slurry is fed to a inclined groove or inclined surface, and with the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter minerals in the upper layer are quickly discharged to the outside of the groove, while the heavy ore materials in the lower part stagnate in the inner groove or flow out at a slow speed from the lower part. After being collected separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for sand mining and beneficiation in bays, riverbanks, sandbanks, and streams. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, large processing output, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in feed volume, density, Granularity, and grade. 2、 The working principle is the same: the mortar is slowly fed to the surface of the spiral groove by installing a feeding chute at the end of the rotating groove head, and sorting is carried out. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi-directional mineral flow to be collected and led out separately. The cross-section of the spiral chute, with a slope change of ten thousand, is suitable for the separation of fine particle materials. rotating spiral chute equipment. 3. Features 1. The sorting process is stable and easy to control. 2. The allowable range of feed density is relatively large. 3. The enrichment ratio is high and the recycling rate is high. 4. The land occupation is relatively small and the water consumption is low. 5. The structure is simple and no power is needed. 6. The processing output is large. 7. The installation is simple and the operation is simple. 8. The investment is small and effective. The rotating spiral chute equipment is fast. 4. The Granularity of the mineral materials processed according to the type is simple, Chutes can be divided into three types: (1) Coarse size chutes. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral materials. (3) Slurry chute, with a feeding particle size of less than 0.074mm. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Rotating Spiral Chute Equipment Rotating Spiral Chute Equipment

Rotating spiral chute equipment