Iron ore spiral chute factory

Introduction to Iron Mine Spiral Chute Plant 1. Chute beneficiation includes a slope flow beneficiation process. Mineral mortar is fed to some inclined inclined grooves or slopes. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material is quickly discharged to the outside of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or flows out at a slow speed from the lower part. After being obtained, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product is also characterized by suitable structure, easy installation, small footprint, easy operation, stable beneficiation, clear beneficiation, large processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The technical principle is that the mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. 3. Features and Advantages of the Iron Mine Spiral Chute Plant: 1. Ultra large scale, large processing capacity, and modern mineral processing principles require large-scale creation of benefits. 2. Fine granulation refers to the treatment of fine and small mineral particles, especially the treatment of mineral materials with a particle size of -0.047mm. Originally, the mechanical system could fundamentally ensure the recovery of+0.047mm particles. 3. With the development of Hydraulics, two-phase flow and equipment vibration, spiral chutes have developed from simple use of gravity and water resistance to composite application of centrifugal force, mechanical vibration force, magnetic force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, resulting in an increase in ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, it needs to occupy a small area, space, water and electricity consumption. 5. The simple operation is flexible, the sorting process is stable, and the structure is simple, which is convenient for Computerized maintenance management system. Iron ore spiral chute factory 4. The structure of the fiberglass spiral chute consists of a feeding average device, a cross (tripod), a feeding groove, a rotating groove, a selection groove, a gathering bucket, and a groove pillar. 5、 The spiral chute is suitable for processing 0.6-0.03mm and vein ore or ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and river sand mines, as well as sand gold mines. Iron ore spiral chute factory Iron ore spiral chute factory