Daily processing capacity of spiral chute

Daily processing capacity of spiral chute

The daily processing capacity of the spiral chute is 1. Explanation: The gravity beneficiation spiral chute is a combination of fiberglass spiral chute, gravity beneficiation spiral chute, shaking table, and centrifugal beneficiation machine. After relevant scientific research organized by the Ministry of Metallurgy, design, school, and operation appraisal of this beneficiation plant, it is recognized that the machine has excellent performance, advanced sorting objectives, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgy Industry. It has now been awarded the Nonferrous Metals Ferrous mines are widely used. This machine is suitable for sorting iron, ferrotitanium, ferrochrome, pyrite, zircon sand, Rutile, monazite, phosphate rock, tungsten ore, tin ore, tantalum ore, tantalum niobium and other nonferrous metal, rare metal and nonferrous metal ore bodies with different specific gravity. 2、 Use the method to erect the spiral chute, calibrate the vertical line, use an iron frame or wood to set a suitable position, use the mortar pump to send the sand ore to the two feeding ports above the spiral, enter the increased water, adjust the density of the mineral slurry, the mineral mortar naturally swirls from high to low, and a coherent centrifugal force occurs in the flow speed of the whirling inclined surface, and the gravity, Granularity and morphology of the sand ore are different, The efficiency is obtained by the gravity and centrifugal force of the swirling flow, which separates the ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and moved to the sand tank through pipelines. Then, they are discharged by a sand pump, completing the entire beneficiation process. The daily processing capacity of the spiral chute is 3. Advantages and characteristics: 1. Stable, easy to control, and with a relatively large concentration range. 2. Strong production and processing capacity of mineral materials, ultra-high enrichment ratio, and high recovery probability. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. The daily processing capacity of the spiral chute is . The structure of the fiberglass chute is composed of 6 parts, including a feeding homogenizer, a feeding groove, a rotating groove, a product cutting groove, an equipment gathering hopper or a groove bracket (including a cross or triangular frame), etc. The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 Scope of application: FRP spiral chute is used to separate fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite, Rutile, zircon ore, rare earth ore or other metal and non-metallic mineral materials with sufficient Density contrast. Daily processing capacity of spiral chute: Daily processing capacity of spiral chute

Daily processing capacity of spiral chute