Application Cases of Spiral Chutes

Application Cases of Spiral Chutes

The first application case of spiral chute describes that gravity beneficiation is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and low cost. The spiral concentrator is one of the gravity separation equipment, with a structural characteristic that the cross-section presents a cubic parabolic state, suitable for processing finer particle sizes of -0.2MM. In the sorting process, there is no need to add flushing water, and fine, medium, and tailings are selected in sections at the tail of the tank. 2、 The working principle is the same: the mortar is slowly fed to the surface of the spiral groove by installing a feeding chute at the end of the rotating groove head, and sorting is carried out. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi-directional mineral flow to be collected and led out separately. The cross-section of the spiral chute, with a slope change of ten thousand, is suitable for the separation of fine particle materials. The application case of spiral chute 3. The special FRP chute has the characteristics of low power consumption, simple structure, small occupation area, simple operation, stable beneficiation, clear screening minerals, no need for moving parts, easy maintenance and management, and large production capacity per unit area, which are particularly concerned in many gravity beneficiation equipment. The machinery has a relatively wide and stable groove surface, and the area where mortar flows in a laminar flow is larger, making it more suitable for processing medium to fine (-4MM) sized ores. We have produced spiral concentrators with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The output of 1200mm four heads is approximately 4-6 tons per hour. Application case of spiral chute IV. According to the Granularity of the processed ore material, the chute can be divided into three types: (1) coarse particle spiral chute. The maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, handling 2-3MM particle size ore. (3) Slime chute, Granularity of ore feeding is less than 0.074mm. 5、 The application scope of this machine is to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, niobium ore and other nonferrous metals, rare mineral metals and this nonferrous metal mineral body with gravity difference from fine materials with Granularity of 0.3-0.02MM. Application Cases of Spiral Chutes Application Cases of Spiral Chutes

Application Cases of Spiral Chutes