current location: home > News and information > Reselection of knowledge
update date:2023-07-16 03:16:04Number of views: author:huang
Jiangxi Laboratory Spiral Chute 1. Introduction: Gravity beneficiation spiral chutes integrate the characteristics of gravity beneficiation spiral chutes, spiral beneficiation machines, shakers, and centrifugal gold concentrators. They have been identified and approved by relevant scientific research, design, universities, or beneficiation enterprises organized by the Ministry of Metallurgical Industry. They believe that the mechanical performance is superior, the sorting indicators are advanced, and they have been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgy. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. 2、 The production principle is the same: the slurry is slowly fed to the rotating groove surface through the feeding chute at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. Jiangxi Laboratory Spiral Chute III. Advantages and Characteristics 1. High efficiency, high recovery rate, and accurate ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction caused by the appearance of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Jiangxi Laboratory Spiral Chute IV. According to the particle size of processed ore, the chutes can be divided into three types: (1) Coarse grained chutes. The maximum Granularity of ore feeding is above 2-3MM, and the maximum can reach 100-200MM. (2) Sand ore chute, processing 2-3 mm particle grade ore material. (3) Slurry spiral chute, feeding particle size < 0.074mm. 5、 Use This product is used to separate fine materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten ore, placer tin, tantalum, niobium ore or other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Jiangxi Laboratory Spiral Chute Jiangxi Laboratory Spiral Chute
Jiangxi Laboratory Spiral Chute