400 type spiral chute

400 type spiral chute 1. Explanation: The spiral concentrator summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal gold concentrators. After being evaluated by relevant scientific research, design, universities, and beneficiation enterprises organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the sorting indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgy Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating small materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, cassiterite, tantalum niobium, niobium and other non-ferrous metal ore, rare mineral gold or non-metallic mineral body with gravity difference. 2、 Production principle: The spiral chute screening machine is freely placed on the cross (or tripod) on the support table. The uniform mortar is slowly fed to the surface of the rotating groove through the feeding groove installed at the beginning of the spiral groove, and the selection is carried out. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each equipment by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained multi head ore flow. The cross-section of the fiberglass spiral chute and the slope of the curve change, which is very suitable for the separation of fine mineral materials. 400 type spiral chute 3. Special features This machine is suitable for separating 0.3-0.02MM fine materials to obtain iron, ferrotitanium, ferrochrome, ferrosulfur, zircon, Rutile, monazite, phosgenite, tungsten ore, sand tin, tantalum ore, niobium ore and other non-ferrous gold, rare ore metals and non-metallic mineral bodies with gravity differences. This machine also has advantages such as stable selection steps, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and fast efficiency. The 400 type spiral chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, a product cutting groove, an equipment gathering hopper or a groove bracket (including a cross or triangular frame), etc. The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 Use This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum, tantalum niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from fine and small materials with Granularity of 0.3-0.02MM. 400 type spiral chute 400 type spiral chute