Spiral chute for coke storage

Coke storage spiral chute 1. Describe the beneficiation chute including the slope flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the help of flowing water, the mineral particle group is not tight and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the groove, while the heavy mineral on the lower layer is retained in the groove or discharged from the bottom at low speed. After receiving the difference, the selected ore or tailings can be obtained. Fiberglass spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in bays, rivers, sandbanks, and streams. The product also has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The mineral mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The tail of the rotating groove is equipped with a valve type product acquisition groove, and the sorting equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse plane of the fiberglass spiral chute has a change in the slope of the curve, which is extremely suitable for the selection of fine particle materials. Coke storage spiral chute 3. Featured FRP chute has the characteristics of low energy consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, and large output per unit size, which are particularly concerned in a variety of gravity beneficiation equipment. The equipment has a wide and relatively stable groove surface, and the area where the slurry flows in a laminar flow is quite large, making it more suitable for processing medium to fine (-4mm) ore particles. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm have been produced in China, Ф The processing capacity of 1200MM four head is about 4-6 t/h. Coke storage spiral chute IV. According to the Granularity of processed mineral materials, the chute can be divided into three types: (1) Coarse grained chute, the maximum Granularity of feeding is more than 2-3mm, and the maximum can reach 100-200MM. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 This machine is suitable for separating iron ore, ilmenite ore, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphate ore, tungsten ore sand, tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal ore, rare metal and non-metallic ore bodies with specific gravity difference from fine materials with a particle size of 0.3-0.02mm. Coke storage spiral chute Coke storage spiral chute