Can the spiral chute be used

Can the spiral chute be described as belonging to the inclined flow sorting step. Mineral mortar is provided to a partially inclined chute or inclined surface. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer is so light that the mineral quickly flows out of the groove, while the lower part of the heavy mineral material stagnates inside the groove or flows out at a low speed from the lower end. After obtaining it, concentrate and tailings are obtained. Spiral concentrator is a mining and beneficiation machine, especially ideal for sand mining on beaches, river beds, beaches, and streams. The equipment is reasonably structured, easy to install, occupies a small area, has simple operation, stable beneficiation, clear mineral separation, large production capacity, high efficiency, high enrichment ratio, high recovery rate, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The mortar with the same working principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the selection width of each product, the equipment gathering hopper will collect and export the obtained multi head ore flow. The transverse plane of the spiral chute and the different slopes of the curves are particularly suitable for the separation of small particles of mineral materials. Can the spiral chute be used? 3. The special spiral concentrator has attracted special attention among many gravity ore concentrators due to its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear ore screening, no moving parts, convenient maintenance and management, large processing output per unit size and other characteristics. The equipment has a wide or flat groove surface, and the area where mineral mortar flows in a laminar flow is quite large, making it more suitable for processing medium to fine (-4MM) particle sized ores. We have made spiral chutes with diameters of 400, 600, 900, and 1200mm domestically, Ф The processing capacity of 1200mm four heads is about 4-6 tons per hour. Can the spiral chute be used with a structure? The spiral concentrator is composed of six parts: a feeding homogenizer, a feeding trough, a spiral trough, an equipment selection trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, durable, and durable consumer goods that are not easily damaged. A multi tube feeding homogenizer is installed above the rotating groove to sort minerals equally, making it easy to control. The concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The evenly distributed slurry passes through the feeding chute installed at the head end of the spiral groove and slowly feeds onto the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type new product acquisition groove, which allows the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. To adjust the orientation of the valve block and change the width of each new product, it is necessary to cut it off. The new equipment gathering bucket is a concentric annular tube that differentially collects and leads selected multi-directional mineral flows. The transverse surface of the fiberglass chute and the slope of the curve change greatly to adapt to the selection of fine-grained materials. 5、 The use scope of glass fiber reinforced plastic chute is suitable for the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic ores. Can the spiral chute be used? @ @ 000 Can the spiral chute be used