Spiral chute with magnetic suction

Spiral chute with magnetic suction

Introduction to the magnetic suction spiral chute 1. The chute beneficiation includes the inclined flow separation process. The slurry is fed to a inclined groove or inclined surface, and with the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter minerals in the upper layer are quickly discharged to the outside of the groove, while the heavy ore materials in the lower part stagnate in the inner groove or flow out at a slow speed from the lower part. After being collected separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for sand mining and beneficiation in bays, riverbanks, sandbanks, and streams. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, large processing output, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in feed volume, density, Granularity, and grade. 2、 The mineral mortar with the same working principle is slowly fed onto the rotating groove surface through the feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi head ore flow to be collected and exported separately. The cross section of the spiral concentrator, with a change in the slope of the curve, is extremely suitable for the selection of fine-grained materials. with magnetic suction spiral chute 3. Features: Fiberglass spiral chute is particularly popular in many gravity beneficiation machines due to its low power consumption, simple structure, small footprint, easy operation, stable beneficiation, clear screening of minerals, no movement accessories, easy maintenance and management, large processing capacity per unit size, and other characteristics. The machine has a wide and stable groove surface, and the mortar has a large laminar flow area, which is more suitable for processing medium and fine (-4mm) Granularity ores. Our country has made spiral chutes with diameters of 400, 600, 900, and 1200MM, Ф The output of 1200mm four heads is about 4-6 t/h. The spiral chute with magnetic suction IV. According to the particle size of the processed mineral materials, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of the feeding material is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 The spiral chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic mineral materials. Spiral chute with magnetic attraction Spiral chute with magnetic attraction

Spiral chute with magnetic suction