The Effect of Spiral Chutes on Yield

The Effect of Spiral Chutes on Yield

The impact of spiral chutes on yield: 1. Overview of chute sorting, including the steps of inclined flow sorting. Mortar is provided in some inclined grooves or inclined surfaces. With the assistance of flowing water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral on the lower layer is trapped in the groove or flows out at a low speed from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, especially ideal for mineral mining and beneficiation at seaside, riverbank, sand bank, and creek banks. The product also features appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture-proof, rust proof, durable and anti-corrosion, and strong applicability to the fluctuation of feed volume or density, Granularity, and grade. 2、 The method is to set up the fiberglass chute, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position, and use a sand pump to deliver the ore to the two feeding ports on the spiral top. Add water to adjust the concentration of the ore slurry, and the ore slurry will naturally rotate from top to bottom, generating a single inertial centrifugal force in the rotating slope flow rate, based on the differences in the specific gravity, particle size, and state of the sand ore, Through the action of gravity and centrifugal force generated by swirling flow, the sand and ore are separated. The concentrate flows into the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand pit through a pipeline, and then discharged by a sand pump, completing the entire beneficiation process. The impact of the spiral chute on the production rate of . Highlights or characteristics: 1. Ultra high efficiency, high recovery rate, and accurate mineral sorting; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low cost, long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction force formed by the appearance of 6 diamond sand makes the beneficiation efficiency superior to other plastic surfaces. The impact of spiral chutes on production rate: 4. The construction of a fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating pieces is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. It also has the advantages of lightweight, solid, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer for ore dressing, which is simple and convenient to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table to restrict stacking. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for selection. The tail of the spiral groove is installed in a valve type new product selection groove, allowing the sorted new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product agglomeration bucket is a concentric circular tube that leads to the differential aggregation of selected multi-directional mineral flows. The cross section of the fiberglass chute has different slopes, which is very suitable for the selection of fine particle mineral materials. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, tungsten ore, tin ore, tantalum ore, niobium, and other non-ferrous metals, rare mineral metals and non colored metal minerals obtained by gravity difference from fine materials with Granularity of 0.3-0.02mm. The Influence of Spiral Chute on Yield The Influence of Spiral Chute on Yield

The Effect of Spiral Chutes on Yield