Spiral chute process picture

Spiral chute process image 1: Introduction: The chute selection belongs to the slope flow selection process. Mineral mortar is fed to a partially inclined chute or inclined surface, and with the assistance of water, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly exits the outside of the chute, while the lower layer of heavy minerals stays inside the chute or flows out at low speed from the bottom. After differentiation, the selected ore or tailings are obtained. Spiral chutes are machinery for mining and mineral processing, making them particularly ideal for mining sand deposits in bays, rivers, sandbanks, and streams. The equipment has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The slurry with the same technical principle is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for selection. The tail end of the rotating groove is equipped with a valve block type equipment to select the groove, allowing the sorted products to be divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to obtain the width of each device, the product gathering hopper will differentiate and densely extract the intercepted multi-directional mineral flow. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Spiral Chute Process Picture 3. Characteristics 1. Stable sorting process and easy control 2. Wide range of allowable changes in ore concentration 3. Ultra high enrichment ratio and high recycling rate 4. Small land occupation and water consumption 5. Simple structure without power 6. More production 7. Simplified installation and easy operation 8. Small investment and quick effect Spiral Chute Process Picture 4 The structural composition of the fiberglass chute is composed of a feeding equalizer, a cross (tripod), a feeding chute, a rotating chute, a cutting chute, a gathering bucket, and a trough support. 5、 The spiral chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic mineral materials. Spiral chute process image Spiral chute process image