Do spiral chutes require grooves for selection

Do spiral chutes require grooves for selection

Is it necessary to carve grooves for the selection of spiral chutes? 1. It is explained that the spiral concentrator combines the characteristics of spiral chutes, gravity spiral chutes, shaking tables, and centrifugal gravity concentrators. After relevant scientific research organized by the Ministry of Metallurgical Industry, appraisal and approval by departments such as design, universities, and this beneficiation company, it is recognized that this type of machine has excellent performance, advanced sorting objectives, and has obtained the Science and Technology Research Achievement Award from the Ministry of Metallurgy. It has now been awarded the Nonferrous Metals Ferrous mines are widely used. This equipment is applicable to sorting iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phengite, tungsten ore, tin, tantalite, niobium and other nonferrous metal, rare metal and nonferrous metal ore bodies with different density and specific gravity. 2、 The principle of operation is that the spiral concentrator does not limit the placement of the mineral screening device on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. Do you need to carve grooves for the selection of spiral chutes? 3. Features: Spiral concentrators have attracted more attention in various gravity separation machinery due to their low power consumption, simple structure, small footprint, easy operation, stable beneficiation, clear mineral sorting, no need to move accessories, convenient maintenance and management, strong processing capacity per unit size, and other characteristics. The equipment has a wide and relatively flat groove surface, and the area where the slurry flows in a laminar flow is larger, making it more suitable for processing medium to fine (-4mm) particle sized ores. China has produced fiberglass chutes with diameters of 400, 600, 900, and 1200MM, Ф The processing capacity of the 1200mm four head is approximately 4-6 tons/hour. Does the selection of spiral chutes require grooving? @ @ 000 4. The structure of the spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper or groove support (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosgenite, wolframite, cassiterite, tantalum, niobium and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Do you need to cut grooves for spiral chute selection? Do you need to cut grooves for spiral chute selection

Do spiral chutes require grooves for selection