Specification parameters of external spiral chute

Specification parameters of external spiral chute

The specification parameters of the outer spiral chute are as follows: 1. Overview of the mineral sorting steps of the inclined surface flow in the chute sorting process. The slurry is fed to a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The upper layer of light minerals is quickly discharged from the groove, while the lower layer of minerals with high specific gravity stays in the groove or flows out at low speed from the bottom. After each is connected, the selected ore or tailings are obtained. Spiral concentrators are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation in coastal, river, sand banks, and creeks. The equipment has a suitable structure, is installed in a simple and simple manner, occupies a small land area, has simple operability, stable beneficiation, clear separation, strong processing capacity, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. There are also advantages such as lightweight, moisture-proof, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 Production principle: The spiral mineral separator is not limited to placing on the cross (or tripod) of the support table. The uniform slurry is slowly fed to the rotating groove surface through the feeding groove installed at the head of the spiral groove for sorting. A valve type product selection slot is installed at the tail, allowing the selection equipment to be divided into three (or four) categories according to grade along the radial direction. Adjust the orientation of the valve block to obtain the width of each device. The product gathering bucket is a concentric circular tube that distinguishes and densely draws out the intercepted multi-directional mineral flow. The transverse surface of the fiberglass spiral chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. External spiral chute specification parameter 3. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphate, tungsten ore, sand tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal, rare metal or nonferrous metal ore bodies with different specific gravity. This machine has advantages such as stable sorting steps, easy control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery rate, small floor area, small water consumption, simple structure, no need for power, large processing output, easy installation and understanding, easy operation, and quick effectiveness when input is small. The specification parameters of the outer spiral chute are . The fiberglass chute is composed of a feeding equalizer, a cross (tripod), a feeding chute, a rotating groove, a receiving groove, a gathering bucket, and a groove pillar. 5、 Application This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalum ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. Specification parameters of external spiral chute

Specification parameters of external spiral chute