Titanium iron spiral chute

Titanium iron spiral chute: Titanium iron spiral chute: 1. Introduction: Gravity beneficiation spiral chute is a combination of gravity beneficiation spiral chute, fiberglass spiral chute, shaking table, and beneficiation centrifuge. After relevant scientific research organized by the Ministry of Metallurgical Industry, appraisal by departments such as design, university, and beneficiation company, it is recognized that this equipment has excellent performance and progress in beneficiation indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been recognized as a non ferrous metal Ferrous mines are very versatile. This product is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, ethylene phosphate, tungsten, tin placer, tantalum, tantalum niobium and other nonferrous metal ores, rare ore metals and non-metallic ore bodies with density and specific gravity differences. 2、 The mortar with uniform working principle is slowly fed onto the rotating groove surface through the feeding chute installed on the rotating groove head, and the selection is carried out. The bottom of the spiral groove is equipped with a valve type equipment selection groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the width of each device, the product gathering hopper aggregates and exports the intercepted variable mineral flow. The cross section of the spiral concentrator and the slope of the curve change greatly, making it suitable for the separation of fine ore particles. Titanium Iron Spiral Chute III. Features: Fiberglass reinforced plastic spiral chutes have attracted special attention in various gravity beneficiation machines due to their low power consumption, simple structure, small land occupation, easy operation, stable beneficiation, clear ore separation, no need for moving parts, easy maintenance and management, and large single area processing output. The machinery has a relatively wide and stable groove surface, and the area where mineral mortar flows in a laminar flow is huge. It is more suitable for processing medium to fine (-4mm) sized ores. Our country has produced spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 T/H. Titanium iron spiral chute 4. Structural composition: The spiral concentrator consists of six parts: a feeding homogenizer, a feeding trough, a spiral trough, an equipment selection trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, durable, and durable consumer goods that are not easily damaged. A multi tube feeding homogenizer is installed above the rotating groove to sort minerals equally, making it easy to control. The concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The evenly distributed slurry passes through the feeding chute installed at the head end of the spiral groove and slowly feeds onto the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type new product acquisition groove, which allows the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. To adjust the orientation of the valve block and change the width of each new product, it is necessary to cut it off. The new equipment gathering bucket is a concentric annular tube that differentially collects and leads selected multi-directional mineral flows. The transverse surface of the fiberglass chute and the slope of the curve change greatly to adapt to the selection of fine-grained materials. 5、 Application: FRP spiral chute is suitable for separating fine iron, ferrotitanium, ferrochrome, ferrosulfur, sand tin, tantalum niobium, placer gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and nonferrous metal minerals with completely sufficient specific gravity difference. titanium iron spiral chute