Deformation and leakage of mineral processing spiral chute surface

Deformation and leakage of mineral processing spiral chute surface

Deformation and leakage of ore on the surface of the beneficiation spiral chute 1. Description. The chute beneficiation involves the step of inclined surface flow separation. The slurry is fed into a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The lighter minerals in the upper layer quickly flow out of the groove, while the minerals in the lower layer with a higher specific gravity stay inside the groove or discharge from the bottom at a low speed. After being extracted, the concentrate and tailings are obtained. The spiral concentrator is an equipment for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large output, high efficiency, high enrichment ratio, high recycling rate, and reliable operation. There are also advantages such as small weight, moisture resistance, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 Technical principle: The deformation and even leakage of ore on the surface of the beneficiation spiral chute are evenly distributed, and the slurry is slowly fed onto the surface of the spiral chute through the feeding trough installed at the head of the rotary chute, implementing sorting. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. Deformation and leakage of the surface of the beneficiation spiral chute 3. Highlights and characteristics: 1. Ultra high efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Deformation and leakage of ore on the surface of the beneficiation spiral chute. The spiral concentrator is composed of a feeding equalizer, a cross (tripod), a feeding chute, a rotating chute, a selection chute, a gathering bucket, and a trough support. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. Mineral processing spiral chute surface deformation and ore leakage Mineral processing spiral chute surface deformation and ore leakage

Deformation and leakage of mineral processing spiral chute surface