Spiral chute flow rate

Spiral chute flow rate 1. Describing the chute separation of minerals is a step of inclined flow separation. Mineral mortar is provided on partially inclined inclined chutes or slopes. With the assistance of flowing water, the mineral particle group is not tight and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After being connected, concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for mineral mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of ore, high yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume and density, Granularity, and grade. 2、 The mineral mortar with the same technical principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each device, the product gathering hopper allows the intercepted variable mineral flow to be converged and exported separately. The transverse plane of the fiberglass spiral chute is particularly suitable for the separation of fine ore materials when the slope of the curve changes. spiral chute flow rate 3. Advantages or characteristics 1. High efficiency, high recycling rate, and correct mineral sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low cost and long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Spiral chutes have a flow rate of , and are all composed of feeding homogenizers, crosses (tripods), feeding chutes, spiral chutes, intercepting chutes, gathering buckets, and trough pillars. 5、 The fiberglass chute used in the field can be adapted to the separation of fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient Density contrast. Spiral chute flow rate Spiral chute flow rate